
I continued to cut component tiles on the X-Carve.



And while the X-Carve works away, I started sanding the piece I had glued together last night.

I continued to cut component tiles on the X-Carve.
And while the X-Carve works away, I started sanding the piece I had glued together last night.
Before starting a cutting job, one should make sure that it is the right piece you want to cut. I…
0My first attempt to carve the Hawaiian Islands Chain was to have it fit all on the bed of the…
0The SD card for the QuickDraw Bot went back, and I had to re-flash a new operating system for the…
0I made a trip to Goby Walnut Products in Portland, probably my favorite source for hardwood, where I discovered some…
0With the gluing finished, I started sanding the components and rounded the corners of the legs with the router. I…
0I stumbled across this website in one of the Facebook groups I joined (I don’t remember which one) and purchased…
0I am starting to create items for my upcoming online store. One of the items will be these trout silhouettes…
0Because of the size of the Big Island, I had to be a bit more creative in getting a piece…
0I finally was able to spend some time at the shop, using the X-Carve to create a battery pack storage…
0In order to reduce the height of the oscillating sander, I recessed the sander. I also started working on a…
0I am having issues with the Anycubic Photon S printer. I ran out of Anycubic green resin and switched over…
0A couple of days ago, I redesigned and remade me material placement brackets for the X-Carve CNC Router. After the…
0I was so happy with the thin stock walnut remnants I picked up at Goby Walnut Products that I picked…
0Over the last couple of days, I finished the third Simba Simple chair.
0
You must be logged in to post a comment.