August 28, 2017 Shop Log

  • I worked on mounting brackets for the next solar recharging station. Instead of being mounted to square perforated tube, this station will be mounted to a round solid tube. I used the Shapeoko to cut out the (4) pieces for the mounting blocks, two pieces per block. I glued the two pieces together. For better hold on the round tube, I cut a 5° angle on the mounting surface to the second half of the French cleat.
  • I did some more experimentation with the FSL Muse Laser Engraver and Cutter. More trout with A River Runs Through It quotes…
  • Did a trash and recycling run.
  • Allowing the solar recharging station catch some last rays of sun…

August 27, 2017 Shop Log

  • I worked on a solar charging station with the 60-watt solar panel.
  • With the solar charging station finished and I waiting for Jill and McKenzie to pick me up to go to dinner, I did some more experimentation with my Muse Laser Engraver and Cutter. Now I worked on trout cutouts with A River Runs Through It quotes engraved on them. Of course, Jill had to point out a mistake I made in the quote.

August 24, 2017 Shop Log

  • The controller stack for the Full Spectrum Laser Muse Laser Engraver and Cutter came back yesterday, and today I finally had a chance to reinstall it. So far so good…
  • Now we need to run a job to make sure it works properly. Truthfully, this is only the third job I have run on this machine since its purchase at the end of May.
  • The end result turned out well.
  • I need to build two more solar charging stations.
  • I ordered a 60-watt solar panel from Amazon.
  • I have another 30-watt solar panel from a previous project.
  • I ordered (2) solar charge controllers from Amazon.
  • I ordered (2) 12-Volt 20ah batteries from Amazon.

August 11, 2017 Shop Log

  • I finally completed the fourth CEIA Magnetometers Storage Dolly with the installation of the Battery Storage Box.
  • I moved the fourth CEIA Magnetometers Storage Dolly out of MakerCave to the Amphitheater.
  • I managed to cut two more pairs of yokes for the CEIA Magnetometers.
  • Also stockpiled parts for future CEIA Magnetometers Storage Dollies…
  • The latest addition to the MakerCave Art Gallery…